You are here: Index > Certification > CE mark
Machinery CE mark
PAHS Testing

The European Commission issued Directive 2005/69/EC on December 29, 2005 to take effect. The directive is 76/769/EEC of 27th Amendment. The directive on May 31, 2009 abolished the corresponding control requirements in the REACH regulations restrict articles, using a wide range of polycyclic aromatic hydrocarbons, and as great harm, there are many well-known corporate control of electrical and electronic products started in the PAHs, including anthracene the items included in the REACH Regulation the material is highly concerned about the matter to the SVHC list. January 8, 2008 the German Security Technology Certification Center (ZLS) announced ZEK01-08 document, required from 1 April 2008 at the GS mark certification from the mandatory membership of PAHs in the test, and provides the products did not pass the test will PAHs GS certification mark can not get into Germany and smooth.

 GS mark the limits of the PAHs are divided into three categories,

Item

A class

B class

C class

 Material

 

Into the mouth of the materials or for use by children under 3 years old, with skin contact with material toys

Contact with the skin longer than 30 seconds (prolonged exposure) and does not belong to the first class of materials

Contact with the skin is less than 30 seconds (short exposure) and does not belong to the first and second class of materials

BaP

Not detect 1(Less than 0.2mg/kg)

1 mg/kg

20mg/kg

Total PAHs

Not detect 1(Less than 0.2mg/kg)

10mg/kg

200mg/kg

1: If the test result is greater than a class II but in line with the limits need to be based on DIN EN1186 and 64LFBG80.30-1 tested the migration test results to confirm.

 The presence of high risk materials: plastic, rubber, paint, rust-proof oil, release agents, lubricants, etc.


 


Previous:PFOS test
Next:There is no corresponding information...