You are here: Index > Certification > CE mark
materials CE certification
PED certification model introduced
PED certification compliance review mode
Mode A: internal production control
The model requires manufacturers to prepare technical documents, including: a general description of pressure equipment, design drawings, strength calculations, using the standard list of test results, test reports.
Pressure equipment manufacturers in each CE mark on the play and make a written declaration of conformity.
This mode does not require authority (Notified body) implementation review.
Model A1: take the final assessment of the internal supervision of manufacture and inspection
In addition to model A requirements, perform a final assessment by the manufacturer (final inspection and pressure test), authorized institutions are making or have completed the supervision of pressure equipment for occasional spot checks.
In addition to CE marking and declaration of conformity, but reflects the authority's responsibility to play in each authority on pressure equipment identification number.
Mode B: EC type approval
Proved by an authorized agency representative sample of manufacturers to meet the directive requirements.
In addition to model A requirements, increasing the content of the manufacturing process. Authority will not meet the harmonized European standards or European approval of materials, implementation and verification of materials evaluation and award of certificates; approval of a permanent connection (welding) process; verify welding and NDT personnel qualification requirements have been assessed and approved; the same time to verify the sample manufacturing meet the technical documentation requirements.
Authority to issue an EC type approval certificate, valid for 10 years.
Model B1: EC design approval
By the authority that a product is designed to meet the pressure equipment directive.
In addition to the sample do not meet the technical documentation verification requirements, the authority's assessment of the project with the mode B.
Authority approval will be issued the EC design certificate, valid for 10 years.
Model C1: Type line
Pressure equipment manufacturers to ensure compliance with EC type approval certificate and satisfy the type described in Directive. Authority being manufactured or completed the supervision of pressure equipment for spot checks from time to time.
On each product to hit the CE mark, authority identification number, and issue a written declaration of conformity.
Mode D: Production quality assurance (ISO 9002)
Manufacturer in accordance with the approved quality system (ISO 9002) for production, final inspection and testing to ensure that pressure equipment complies with EC type approval certificate or EC design type approval certificate and satisfy the instructions described in the requirements.
Authority to review the quality system to determine whether they meet the requirements. Authority must carry out regular audits of the quality system every three years to complete a comprehensive review. Authority will also perform from time to time manufacturers supervision and inspection to verify the normal operation of the quality system.
CE mark for each product to fight, authority identification number, and issue a written declaration of conformity.
Model D1: Production quality assurance (ISO 9002)
A technical documents by mode. Manufacturer in accordance with the approved quality system (ISO 9002) for production, final inspection and testing to ensure that pressure equipment complies with Directive requirements.
Rest with the model D.
Mode E: Product quality assurance (ISO 9003)
Manufacturer in accordance with the approved quality system (ISO 9003) for final inspection and testing to ensure that pressure equipment complies with EC type approval certificate and satisfy the type described in Directive.
Rest with the model D.
Mode E1: Product Quality Assurance (ISO 9003)
A technical documents by mode. Manufacturer in accordance with the approved quality system (ISO 9003) for final inspection and testing to ensure that pressure equipment complies with Directive requirements.
Rest with the model D.
Mode F: Product Verification
Pressure equipment manufacturers to ensure compliance with EC type approval certificate or EC design approval certificate and instruction requirements.
Authority for the implementation of inspection and test each product to verify its type in line and meet the directive requirements. Focus on welding and NDT personnel verify the required qualifications have been assessed and approved; materials manufacturer issued certificate; final product inspection and verification test (pressure test) and check safety devices.
CE mark for each product to fight, authority identification number, and issue a written declaration of conformity.
Authority issuing the product certificate of conformity.
Mode G: single verification
Manufacturer in accordance with model A and technical documents.
Authority for each inspection of pressure equipment design and construction, and manufacture in accordance with relevant standards, inspection and testing.
Authority of the test content in addition to model B projects, including the final inspection and verification test (stress test) and check safety devices.
CE mark for each product to fight, authority identification number, and issue a written declaration of conformity.
Authority issuing the product certificate of conformity.
Mode H: Full quality assurance (ISO 9001)
Manufacturer in accordance with the approved design, manufacture, final inspection and testing of the quality system (ISO 9001) implementation, to ensure that pressure equipment complies with Directive requirements.
Authority for quality system assessment, regular review and supervision and inspection from time to time, with the model D.
CE mark for each product to fight, authority identification number, and issue a written declaration of conformity.
Model H1: With the final design approval and supervision of the comprehensive assessment of specific quality assurance (ISO 9001)
In addition to the requirements of H mode, the need to add:
Manufacturer authorized agencies to apply for design approval, accredited in line with directives, by the authority issued the EC design approval certificate.
Authority through from time to time visit the manufacturer perform the final assessment (final inspection and pressure test) to perform supervision and inspection.